Product ID:310, HAI-310SS
MSDS Date:08/21/1989
FSC:9540
NIIN:00N032121
MSDS Number: BPMYB

HARRISON ALLOYS INC

308 MIDDLESEX ST
HARRISON, NJ 07029
US

Emergency Phone: 201-483-4800

Info Phone: 201-483-4800

Cage: 49076

HARRISON ALLOYS INC

HARRISON, NJ 07029 US

Telephone: 201-483-4800

Cage: 49076

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 27%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 50%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 21%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

NIOSH/MSHA APPROVED RESPIRATORS I/A/W OSHA 29

RTECS: 9999999ZZ

IN INGREDIENTS BY USE OF ADEQUATE EXHAUST

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:UNDER NORMAL HANDLING AND USE,
EXPOSURE TO SOLID, MASSIVE FORMS OF ALLOY PRESENTS FEW HEALTH
HAZARDS. THEY MAY INCLUDE SKIN IRRITATION OR OTHER ALLERGIC
REACTIONS IN SENSITIVE INDIVIDUALS. EFFECTS OF EXPOS TO DUST,
WELDING FUME AND GASES: ACUTE: NAUS, TIGHTNESS OF CHEST, FEVER,
IRRIT OF EYES, NOSE, (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NICKEL: GROUP 1 (IARC), ANTICIPATED TO
BE CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ:THROAT & SKIN; LOSS OF CONSCIOUSNESS
DUE TO WELDING GASES/LACK OF O2. CHRONIC:ADVERSE EFTS MAY INCLUDE
SKIN SENSIT, NEUROLOGICAL DAM & RESP DISEASES (BRONCHIAL ASTHMA,
LUNG FIBROSIS/PNEUMOCON IOSIS). ACCORDING TO OSHA 20CFR1910.1200
NICKEL & CHROMIUM ARE CONSIDERED POSS CARCINOGENS. RECENT (SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE FROM EXPOSURE AND OBTAIN PROMPT MEDICAL
ATTENTION. ADMINISTER O2 IF UNCONSCIOUS. IF NOT BREATHING,
RESUSCITATE IMMEDIATELY. INGEST: CALL MD IMMEDIATELY . EYES:
IMMEDIATELY FLUSH W/ POTABLE WATER FOR A MINIMUM OF 15 MINUTES,
SEEK ASSISTANCE FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER.
CALL MD .

Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . MATERIAL IS NONFLAMMBLE.
Unusual Fire/Explosion Hazard:MATERIAL IS NONFLAMMABLE; HOWEVER,
WELDING ARCS AND SPARKS CAN IGNITE FLAMMABLE LIQUIDS AND VAPORS AND
COMBUSTIBLE SOLIDS.

Spill Release Procedures:UNDER NORM HNDLG & USES MATL IS NOT VOLAT/
DUSTY & DOES NOT PRESENT SPILLAGE & LEAKAGE PROBLEMS.NO PROT REQD,
EXCEPT AVOID PRLNGD/RPTD DIRECT SKIN CONT IF SENSITIVE TO METALS.
USE GLOVES.IF HOWEVER, M ATL IS RELEASED/SPILLED FROM CUTTING,
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MATL IN SOLID FORM DOES NOT REQ
SPECIAL PRECS IN HNDLG/STORING. HOWEVER, USE INDUST HYGIENE AIR
MONITORING TO ENSURE USE OF MATL DOES NOT (SUPP DATA)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF SOLID METAL ALLOYS ARE CONVERTED IN MFG
(INCLUDING GRINDING, HIGH TEMP CUTTING & WELDING) PROCESSES TO
DUSTS, FUMES, GASES/MISTS & VENT IS NOT ADEQ TO MAINTAIN EXPOS <
LIMS SPECIFIED THEN RESP PROT SHLD BE USED. USE ONLY (ING 5)
Ventilation:IF SOLID METAL ALLOYS ARE CONVERTED TO DUSTS, FUMES/MISTS,
MAINTAIN WORKING ENVIRON < EXPOS LIMS SPECIFIED (ING 6)
Protective Gloves:LEATHER OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHEN CUTTING/GRINDING/WELDING, WEAR FACE
PROT/ FLAME RETARDANT CLTHG.SELECT WELDING LENS SHADE FROM AWS
PUBLICATION F2.2
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HLTH HAZ:EPIDEMIOLOGICAL STUDIES OF WORKERS MELTING & WORKING ALLOYS
CONTAINING NICKEL-CHROMIUM HAVE FOUND NO INCREASED RISK OF CANCER.
SPILL PROC: GRINDING/WELDING OPS, VACUUM RESIDUE INTO SUITABLE C
NTNRS & DISPOSE OF I/A/W EPA OR LOCAL REGS. HNDLG/STOR PREC: CREATE
EXPOS WHICH EXCEED LEVELS SPECIFIED.

HCC:N1
Boiling Pt:B.P. Text:4982F,2750C
Melt/Freeze Pt:M.P/F.P Text:2642F,1450C
Spec Gravity:7.9
Solubility in Water:0
Appearance and Odor:GREY METALLIC; ODORLESS SOLID SHAPED AS WIRE, ROD
OR STRIP.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS. CONTACT WITH MINERAL ACIDS WILL RELEASE HYDROGEN - A VERY
READILY COMBUSTIBLE GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF METALS, CHROMATES, FLUORIDES
AND COMPLEX METALLICS. THE GASES MAY INCLUDE CO, OZONE AND NITROGEN
OXIDES.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.